Router bits in every measurement

Upcut spiral router bit

Pulls chips up and out of the cut. Fast feed rates and a clean bottom edge; ideal for slotting and pockets in solid wood.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 1, 2 or 3 flutes

Downcut spiral router bit

Pushes chips down for a crisp top edge. The choice for melamine, laminates and veneered panels.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 2 or 3 flutes

Compression spiral router bit

Up and down flutes in one bit, so both faces of sheet goods stay chip-free. The nesting workhorse.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 2 or 3 flutes

Straight 2-flute router bit

Economical straight flutes for general cutting, dadoes and rabbets in wood and MDF.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 2 flutes

Single O-flute router bit

Polished single flute that clears chips fast, for acrylic, PVC and aluminum with clean, melt-free edges.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 1 flute

V-groove router bit

Sign lettering, chamfers and V-folding grooves in aluminum composite panels.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Angle 60°, 90° or 120°
• Diameter 1/4" or 1/2" (6 or 12 mm)
• 2 flutes

Ball nose router bit

Rounded tip for 3D carving, relief work and smooth contoured surfaces.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Cut diameter 1/8" to 3/4" (3 to 16 mm)
• 2 flutes

Surfacing / spoilboard router bit

Wide cutter that flattens slabs, end-grain boards and CNC spoilboards in fewer passes.

• Shank 1/2" (12 mm)
• Cut diameter 1" to 3" (25 to 76 mm)
• 2 or 3 flutes

Roundover router bit

Bearing-guided round edge profile for tabletops, shelves and cabinet doors.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Radius 1/8" to 1/2" (3 to 12 mm)
• 2 flutes

Chamfer router bit

Bearing-guided 45° bevel for edges, joinery and decorative profiles.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Size 1/8" to 1/2" (3 to 12 mm)
• 2 flutes

Tapered engraving router bit

Fine tapered tip for detailed engraving, small text and inlays.

• Shank 1/4" or 1/2" (6, 8 or 12 mm)
• Tip 0.010" to 1/16" (0.2 to 1.5 mm)
• 1 flute

Saw blades

Main, scoring and panel-saw blades for sliding saws, beam saws and panel saws.

Collets & tool holders

ER collets and tool holders for CNC spindles.

Boring bits

Dowel, through-hole and hinge boring bits for line and CNC boring.

Edge bander knives & cutters

Trim knives, pre-milling cutters and corner rounding tools.